| Shop Rate |
$75/Hour |
|
| Rush Job |
$50 |
Additional charge, subject to time availablity. If the job requires parts that take time to come in, the fee will still apply for rush diagnostic service. |
| Minimum Charge |
$30 |
Repair or quote on repair |
| Maximum Unquoted Charge |
$60 |
If you bring a firearm in for a quote on repairs, and it's a simple fix, instead of charging you for diagnosis and again for the repair, if I can fix it without the bill exceeding $60 I will just fix it and save you some money. |
| Storage Fee |
$15/Month/
Firearm |
|
| Basic Gun Cleaning |
$40 |
A basic cleaning includes dissassembly of major components, cleaning, and lubrication. Basic cleaning does not include detailed tear down, or the removal of heavy fouling in barrels. A basic cleaning is all most functional firearms need. You will be contacted if it appears your firearm needs further attention. |
| Rust Bluing Bolt Actions |
$250+ |
Contact with firearms details for an estimate. (Bluing doesn't include more than basic polishing. Heavily pitted guns may require additional polishing at the hourly rate.) |
| Rust Bluing Lever Actions |
$350+ |
Contact with firearms details for an estimate. (Bluing doesn't include more than basic polishing. Heavily pitted guns may require additional polishing at the hourly rate.) |
| Rust Bluing Single Barrel Shotguns |
$250+ |
Contact with firearms details for an estimate. (Bluing doesn't include more than basic polishing. Heavily pitted guns may require additional polishing at the hourly rate.) |
| 12 Gauge Choke Reaming (eg. changing full choke to modified choke) |
$60/barrel |
Chrome lined barrels excluded. |
| 12 Gauge Screw in Choke Installation |
$125/barrel |
Chrome lined barrels excluded. Carlson/Colonial Arms Thinwall Chokes. Chokes are an additional Cost |
| Grind to Fit Recoil Pad Installation |
$50 |
Installation only. Pad to be provided by customer or can be purchased from us. |
| Cut a 3/8" Dovetail |
$75 |
|
| Drill and Tap |
Contact for
Pricing |
|
| Scope Install |
$35 |
Does not include bases, rings, scope or sighting in. |
| Install Yo Dave trigger kit and adjust trigger on CZ 452/455 and BRNO 2/4/5 |
$40 |
Includes the Yo Dave Parts Used |
| Trigger Job |
$60+ |
This is generally an hourly job. Lighten, smooth, reduce creep, reduce overtravel. Parameters adjusted depends on the make and model. |
| Polish 12 Gauge Chamber and Barrel |
$30 |
|
| Install Shotgun Bead |
$35
| Including a bead selected from our available stock. Special order beads may cost extra, or customer may supply bead. |
| Stock Repair |
Hourly rate |
Contact for estimate. |
| Stock Refinishing |
$75+ |
Contact for estimate. |
| Install Adjustable Comb |
|
Contact for estimate. |
